GLASTIFY ULTRA CLEAR aizsargstikls telefonam Galaxy S23 Ultra 2 gab.

GlasTIFY UVTG+ tempered glass is made of lightweight and milled AGC glass with a thickness of just 0.28mm.
In the manufacturing process, it was tempered at 420°C, so it has a surface hardness of 9H, which provides the highest level of protection during daily use and absorbs the force of impact.

UVTG+ is glued with a liquid substance over the entire surface of the screen and then with the help of a UV lamp the substance is cured. This combination results in a perfect effect of smoothness, clarity and responsiveness on a curved screen.
The glass is precisely made and fully functional. Remember that you get 2 pieces of glass in the set.

GlasTIFY brand glasses do not need to be introduced more widely, because they are the absolute "TOP" in the category of screen protection.

* The glass is compatible with most cases available on the market, the die-cut is "Case Friendly".
** Remember to remove and re-add the fingerprint lines - if any - after installing the glass.

CHECK HOW EASY THE INSTALLATION IS: https://youtu.be/bKRgFJ4Rg_w

INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom right after taking a bath - the steam will absorb all the dust from the atmosphere and you will not be disturbed by the installation.
2) Level the phone so that it lies evenly, otherwise the glue will run off the phone and the installation will fail.
Remember to seal the top speaker with the sticker from the kit.
3) Use an alcohol-soaked wipe to thoroughly clean the surface, then use a dry cloth to polish.
4) Get rid of the dust with the sticker.
5) Unscrew the main cap (the glue will not flow) and apply the tube to the very center of the screen, then gently unscrew the top cap (the glue will start to flow).
6) Remove the protective layer and put the glass on the display, if you put the glass crookedly, you can move it freely as long as the glass floats on the screen.
Wait several seconds until the glue fills the entire surface of the glass.
7) Using a UV lamp, cure the glass in each zone for 10 seconds each.
8) Clean the phone from the glue residue and add the fingerprint again.

PRODUCT FEATURES:
- 100% Original
- Packaged in original packaging
- 9H hardness
- Adjusted to fit a rounded screen
- Milled 2.5D edges nice to touch
- Hydrophobic layer
- Oleophobic layer
- Perfectly transparent
- Does not affect touch sensitivity
- Dimensions: 160x75mm

SET INCLUDES:
2 x GlasTIFY UVTG+ glass
1 x installation kit